DVIA-MB
Ultimate Active Isolation System for Electron Microscopes
DVIA-MB is the ultimate base active vibration isolation platform for all commercial electron microscopes such as SEM and TEM. DVIA-MB provides the optimal environment, enabling electron microscopes to obtain high-resolution images of biological and non-biological specimens by reducing vibrations in the critical range of 1 – 5 Hz where the electron microscopes are extremely susceptible to the low frequency vibration.
Designed for High-Performance Electron Microscopes
DVIA-MB is the ultimate base active vibration isolation platform for all commercial electron microscopes such as SEM and TEM. DVIA-MB provides the optimal environment, enabling electron microscopes to obtain high-resolution images of biological and non-biological specimens by reducing vibrations in the critical range of 1 – 5 Hz where the electron microscopes are extremely susceptible to the low frequency vibration.
Superior Active Vibration Isolator
DVIA-MB consists of four units of active vibration isolators in which the elements of air springs and active isolation technology are embedded. The integrated sensors and actuators effectively reduce the low frequency vibrations and starts to isolate vibrations from 0.5 Hz, achieving 90% vibration isolation at 2 Hz. The elements of air springs support payloads from 500 kg to 6000 kg and effectively reduces high frequency vibrations and, moreover, they lowers its natural frequency.
Nanoscale imaging with high resolutions
As per the images clearly above demonstrate, when low frequency vibrations disturb electron microscopes, it is critical to reduce these vibrations with DVIA-MB in order to obtain nano-scale resolution images.
Overcomes Limits of Passive Isolation Systems
The natural frequency of DVIA series is below 0.5 Hz, meaning that DVIA series effectively reduces low frequency vibrations in 1– 5 Hz, where passive isolation systems rather amplify the low frequency vibrations due to its higher natural frequency.
Unbeatable vibration isolation performance
The resonant frequency of the active isolation systems is much lower than the passive isolation systems.
As the graphs above evidently shows, the active systems excels in controlling vibrations in 1-10 Hz range,
where the passive systems amplify the low frequency vibrations rather than filtering them.
DVIA-MB is highly effective in isolating ultra-precision instruments from the low frequency vibrations where the precision instruments tend to be unstable and disruptive. Active vibration isolation starting at 0.5 Hz, DVIA-MB achieves in delivering 90% at 2 Hz and 99% at 10 Hz.
Feed-back & Feed-forward algorithms
DVIA-MB uses the feedback control system to continuously detect vibrations disturbing an isolated payload base and instantaneously react to minimize the vibrations in real-time. The feed-forward system is employed in DVIA-MB to filter out floor vibrations in a predefined way.
Controlling vibrations in all six degrees of freedom
DVIA-MB uses the feedback control system to continuously detect vibrations disturbing an isolated payload base and instantaneously react to minimize the vibrations in real-time. The feed-forward system is employed in DVIA-MB to filter out floor vibrations in a predefined way.
Controlling vibrations in all six degrees of freedom
Inertial sensors and electromagnetic actuators that are installed in the active vibration isolation systems detect and control vibrations in three translational degrees of motions ( X,Y and Z), and three rotational degrees of motions ( pitch,roll and yaw).
On-site tuning for better performance
Vibration levels vary with environment, location, vibration sources etc. Therefore, we offer on-site tuning performed by our experienced engineers to guarantee the maximum performance level and customers’ satisfaction. The engineer conduct a site survey to measure vibration data which is used to tune the feedback and feedforward control systems, maximizing vibration isolation performance.
DAEIL SYSTEMS
Who We Are
Established in 1984, as a first manufacturer of vibration isolation systems in Korea, DAEIL SYSTEMS has been supplying optical tables and advanced vibration isolation systems to industries, research institutes and universities.
With more than 35 years of experience in designing and manufacturing vibration isolation systems, We guarantee to deliver superior vibration isolation performance for a broad range of applications. As we are in the nano technology era, we are determined to develop high-tech products and provide a total solution for vibrations.
Vision
To provide an optimal environment to see the microscopic world.
Mission
With innovative team members and advanced vibration control technology, we aim to create the ideal environment where vibration, acoustic noises and magnetic fields are controlled. Therefore, we can make a contribution to science, industrial technology and society.
Our values
Our people
: We believe in deep collaboration of our people, which allows us to innovate in a way that other companies cannot.
Customer orientation
: We are determined to support customers to meet long-term needs. We align individuals and team objectives around satisfying and retaining customers.
Partnership
: We believe in the power of partnership with our partners to achieve our common goals.
Passion for perfection
: We constantly focus on delivering products without any defects to satisfy every customer.